● Features
The high-viscosity gel does not drip and adheres tightly to mold! Just leave it for 30 minutes and rinse with water※1 to thoroughly eliminate it! Can be used in various places such as rubber packings and joints in the bathroom, around faucets in the washroom, rubber packings on window frames, and edges of washing machine tubs.
Disinfection※2, virus removal※2.
※1 If it cannot be rinsed off, wipe with water.
※2 Does not remove all bacteria and viruses.
● Ingredients
Hypochlorite, sodium hydroxide (1%), surfactant (alkyltrimethylammonium salt), stabilizer
● How to Use
1 Wipe off dirt and moisture thoroughly.
2 Remove the cap and apply directly to mold stains.
(Adjust the amount so that the liquid width is about the same as the nozzle tip.)
◎ Do not use above eye level.
※ Never point the container opening toward your face when opening the cap or using.
※ Be careful not to press the container strongly as the liquid may unexpectedly splash out.
※ Do not shake the container with the cap removed.
3 After about 30 minutes, rinse thoroughly with water or wipe thoroughly with water to avoid residue.
※ For stubborn stains, leaving it for about 1 to 2 hours is effective.
※ Using warm water (about 40°C) is effective for rinsing and wiping.
※ Use a cloth when wiping. Do not use wet tissues, etc.
4 Close the cap tightly after use. Always wash your hands after work, then wash your face and eyes.
●Precautions for Use
■ Caution
(1) Do not use if you are feeling unwell or have heart disease, respiratory diseases, etc.
(2) Always ventilate by opening windows or doors and running ventilation fans. (Opening two or more places increases ventilation effectiveness)
(3) Wear kitchen gloves, masks, and eye protection such as glasses.
(4) Always use alone. Never use together with other products.
(5) Do not use while bathing.
■ Precautions for Use
(1) Do not use for purposes other than intended.
(2) Be careful where you place it to prevent accidental ingestion by people with dementia, etc.
(3) Be careful not to get the liquid in your eyes.
(4) Be careful not to get the liquid on skin or clothing.
(5) Always use alone. Mixing with acidic products, vinegar, alcohol, etc. produces harmful gases and is dangerous.
(6) Do not use large amounts at once or use continuously for long periods.
(7) Materials of unknown type or foreign-made tiles may discolor, so always test in an inconspicuous area before use.
(8) If the liquid remains on bathtubs, walls, sashes, etc., discoloration may occur, so rinse immediately with water.
(9) Be careful as the liquid will bleach clothing and mats.
(10) Avoid direct sunlight and do not place in high temperatures.
(11) When using on high places such as walls, be careful not to get splashes in your eyes when rinsing.
(12) Do not drop to avoid damage.
(13) Do not transfer the liquid to other containers for use.
● Additional Information
■ Uses: Mold removal inside residences
(1) Bathroom (walls, tile joints, mats, small items, rubber packings on doors and window frames, caulking, etc.)
(2) Packings around washbasins and kitchen sinks, faucet joints, etc.
(3) Rubber packings on window frames where mold is a concern (indoors)
(4) Edges of washing machine tubs
■ Liquid nature: Alkaline
■ Items that cannot be used on:
(1) Animal hair brushes
(2) Wooden products
(3) Enamel, aluminum, brass, and other metal products (causes rust)
(4) Plaster walls, wallpaper walls, some unit bath decorative steel plate walls (steel plates attract magnets)
(5) Rubber parts such as bathtub stoppers
(6) Marble
(7) Fabric products such as clothing
■ Approximate usage amount: About 5g per meter (If dispensed at the same width as the nozzle tip, about 6 cm square can be covered.)
■ Precautions for Use: Chlorine-based
(1) Mixing with acidic products produces harmful chlorine gas and is dangerous.
(2) If liquid gets in eyes, rinse immediately with water.
(3) Keep out of reach of children.
(4) Always use with good ventilation.
■ First Aid:
If it gets in eyes, there is a risk of blindness. Do not rub; rinse immediately with running water for more than 15 minutes, and see an ophthalmologist immediately even if there is no pain or abnormality.
● If swallowed, do not induce vomiting; rinse mouth immediately and drink 1-2 glasses of milk or water, then consult a doctor.
● If it gets on skin, wash thoroughly with water immediately. If abnormalities remain, consult a dermatologist.
● If eyes sting, coughing occurs, or you feel unwell during use, stop using and leave the area, then rinse eyes and gargle.
※ Bring the product when visiting a doctor.
