Ultra Hard Cleaner for Mold

● Features
The ultimate weapon against stubborn stains: Ultra Hard Cleaner Series
The long-awaited gel-type mold cleaner

● Ingredients
Hypochlorite, sodium hydroxide (1.0%), surfactant (alkylamine oxide), stabilizer

● How to Use
(1) Before use, be sure to ventilate by opening windows and doors or turning on the ventilation fan. Wear rubber gloves, mask, protective glasses, etc.
(2) Wipe off dirt and moisture thoroughly, apply so as to cover the mold stain, and leave for 15 to 30 minutes.
(3) After finishing, wash off with water or wipe thoroughly. Be careful not to let splashes get into eyes when rinsing.
※ If mold is hard to remove, repeat steps 2 and 3.
※ Some stains may not come off depending on the degree of dirt. After use, tighten the cap and store upright in a cool, dark place. Always wash your hands after work, then wash your face and eyes.

●Precautions for Use
(1) Do not use above eye level.
(2) Use rubber gloves or similar to avoid contact with the Liquid.
(3) Be careful when opening the cap by holding the container firmly, as Liquid may splash out.
(4) If Liquid gets on bathtubs, walls, or window sashes, it may discolor, so do not leave it and wash off immediately with water.
(5) Always use alone. Mixing with acidic products, vinegar, alcohol, or ammonia produces harmful gases and is dangerous.
(6) Keep out of reach of children and pets.
(7) The feel of use changes depending on the temperature.
(8) Be careful not to get Liquid in eyes or on skin.
(9) When using above eye level, soak a sponge or similar and then gently wash.
(10) Do not use for purposes other than intended.
(11) Be careful as Liquid may bleach clothing and mats.
(12) For foreign-made tiles, unit baths, etc., which may discolor, peel, swell, or stain, test in an inconspicuous area before use.
(13) Do not use while bathing.
(14) Do not transfer to other containers for use.
(15) Liquid may become cloudy at low temperatures.

<Additional Information>
● Liquid property: Alkaline

● Uses
Removal of mold stains on rubber packing, caulking, bathroom doors, tile joints, window frames, joints around washbasins and kitchen sinks, window frames, etc.

● Places not usable
Sand walls, fiber walls, plaster, fabric-covered walls, vinyl walls, unit bath decorative steel plate walls (magnetic type), wired glass window frames, enamel, aluminum, brass and other metal products (may cause rust), wooden products, animal hair brushes, artificial marble, marble, cultured marble, clothing

● Usage amount guideline
3 to 5 g per meter

● First Aid
◯ If it gets in the eyes, do not rub and rinse immediately with running water for more than 15 minutes to avoid risk of blindness, and be sure to see an ophthalmologist. If wearing Contact lenses, remove them before rinsing.
◯ If it gets on the skin, rinse immediately with water until slipperiness disappears, and see a dermatologist if abnormalities occur.
◯ If swallowed, do not induce vomiting; rinse mouth and give water or milk, then see a doctor immediately.
◯ If eyes sting or you feel unwell during use, stop immediately and rest in a well-ventilated place. If symptoms do not improve, see a doctor.
* Bring the product when visiting a medical institution.

● Country of Origin
Made in Japan