● Features
Long-lasting moisture & cool wearing comfort
All-in-one for rubbing, disinfecting, protein removal, rinsing, and storage! With a pH close to tears, it is gentle on the eyes.
Comes with a Soft One original lens case
Point 1: Easy open and close with one-touch operation!
Point 2: Clean washing and proper drying!
Keep the lens case clean too. After removing the lenses, you can insert them into the cap to dry.
Point 3: No lost lids!
The integrated design prevents losing or dropping the lid.
This disinfectant can be used for all soft contact lenses. *Not for hard or O2 lenses.

● Efficacy/Effects
Disinfection of soft contact lenses (Group I to Group IV)

● Dosage and Administration
1. Apply a few drops of this solution to the soft contact lenses and gently rub each side 20–30 times with your finger.
2. Rinse both sides of the washed lenses thoroughly with this solution.
3. Fill the lens case with this solution, completely immerse the lenses, and tightly close the case lid. Leave it for at least 4 hours.
<Usage Instructions>
Follow the instructions below for proper care. Perform rubbing every time you wear the lenses and replace with fresh solution.
Always wash your hands thoroughly with soap before handling soft contact lenses.
- Step 1: Rubbing
Place the soft contact lenses removed from your eyes on your palm. Apply a few drops of this solution to the lens surface and gently rub each side 20–30 times with your finger.
- Step 2: Rinsing
Rinse both sides of the rubbed lenses thoroughly with this solution.
- Step 3: Disinfection and Storage
Fill the lens case with this solution, fully immerse the lenses, and securely close the lid. (Be careful not to pinch the lenses.) Leaving it for 4 hours or more completes disinfection.
*For the sake of your lenses and eyes, it is recommended to rinse with this solution before wearing.
○ Lens Case Care
1. Discard the solution inside the lens case and wash it well.
2. With the lid open, insert the recessed part on the side of the lens case into the brim of the Soft One cap.
3. Leave it inserted in the cap to dry thoroughly.

● Ingredients/Quantity
Active ingredient (per 1 mL)
Polyhexanide hydrochloride 0.001 mg

[Other ingredients]
Viscosity agent, isotonic agent, buffer, stabilizer, surfactant, pH adjuster
Contains polyoxyethylene polyoxypropylene glycol as an additive.

● Dosage Form
Liquid

● Precautions for Use
■Do not do (Contraindications)
1) Use this solution only for cleaning, rinsing, disinfecting, and storing soft contact lenses. Do not ingest.
2) Avoid contact of the container tip with contact lenses, fingertips, etc., to prevent contamination or clouding of the solution due to bacteria. Do not use if the solution is cloudy or discolored.
3) Do not use this solution for boiling disinfection. Do not mix with other soft contact lens disinfectants.
4) Always discard the solution in the case after removing lenses and use fresh solution each time.
5) Do not return used solution to the bottle.
6) Do not use the product past its expiration date.
<Consultation>
1) Consult an ophthalmologist before use if:
a. You have had allergic eye symptoms before (e.g., redness, itching, swelling, rash, or redness).
b. You are under medical treatment.
2) If you experience pain, redness, tearing, discharge, foreign body sensation, blurred vision, dryness, or light sensitivity while wearing or after wearing lenses disinfected with this solution, immediately remove the lenses and consult an ophthalmologist. Continuing to wear may lead to eye infections or severe eye damage such as corneal ulcers.
3) If hives, difficulty breathing, or other abnormalities occur during use, stop using immediately and consult a doctor or pharmacist. People with allergies or a history of hypersensitivity reactions to medications should use with caution.
<Other Precautions>
● This solution is intended for disinfecting soft contact lenses. Improper use or failure to follow the instructions may result in incomplete cleaning or disinfection, causing eye infections or severe eye damage that can lead to vision loss. Always follow the instructions in this leaflet.
● Please also read the instructions for your current soft contact lenses carefully.

*To prevent bacterial contamination, avoid touching the container tip to the lens case, solution surface, contact lenses, or fingertips.

[Must follow]
1) Strictly adhere to the usage instructions in this leaflet. Incorrect use may cause incomplete disinfection, leading to eye infections or severe eye damage such as corneal ulcers, which if untreated, can cause blindness.
2) Always wash your hands with soap and rinse well before handling lenses.
3) Always observe the specified disinfection time (4 hours or more). Do not wear lenses before disinfection is complete.
4) After removing lenses, always empty the case, rinse with fresh solution, and let it air dry. Using an unclean lens case can cause bacterial growth, leading to eye infections and severe eye damage such as corneal ulcers.
5) When used by children, ensure use under the supervision and guidance of a guardian.